enlarge image

Single Spray Water Saving Showerhead - saves energy and water with no loss of shower power

Save up to 60% of your shower water and energy costs with one of these amazing water saving handheld shower heads.

If you have a power shower, combi boiler, condensing boiler or a dedicated shower pump, these DEFRA approved water saving replacement flowpoint shower heads are guaranteed to cut down on the water the shower uses, and so save you on water and energy bills.

They're easy to fit to any standard shower hose, and you won't notice any loss of shower power - a mechanism inside the head reduces the flow but maintains the power so you still get a forceful full shower feel.

Do a quick test to see if you'll save water by using one of these water saving shower heads.

To order, click on add to basket, or read on for more information.

 
Price: £16.99 incl. VAT
   
Quantity:     

 
For help and advice, or to order over the phone,
please call 0800 288 8970.
 

More information

Features

Save energy, up to 60% less energy used in the shower

Contemporary style - chrome handle and head

Large 100mm diameter low profile head

Single spray operation

Self cleaning soft rubber face and nozzles

Standard shower hose connection 1/2" thread

Reduce the cost of gas and water bills

Suitable for use with combi and condensing boilers, power showers and gravity showers with a pump fitted

Life time manufacturer guarantee

Please note: A water and energy saving replacement flowpoint shower head is NOT suitable for use with electric showers or Venturi showers.


Quick test to see if you could save money with a Flowpoint shower head

1. You will need a household bucket which should hold a minimum 9 litres (2 gallons), and a stop watch or clock with a second hand.
2. Put the bucket in the bath or the shower, and run the shower at its normal setting into the bucket for one minute, and then stop.
3. If the bucket fills and overflows in less than a minute, your shower is discharging water at a rate in excess of 9 litres (2 gallons) per minute and depending on the time left to run on the clock, probably in excess of 14 to 16 litres (3 to 3.5 gallons) per minute.
4. A Flowpoint shower head is rated at 8 litres per minute at normal domestic shower pressure, so you will save energy, water and money by fitting one!
5. Don't forget to reuse the water once you've finished the test, in the garden, for cleaning or in the bathroom.


Water saving facts

In a typical household bathing accounts for 20% of annual water usage

An average bath uses around 80 litres of water, but a power shower can use more than this and in some cases up to 25 litres per minute

A five minute shower can use up to 125 litres of water

Using an eco shower head can save the equivalent of 63 litres of clean drinking water per shower!

The Environment Agency has recommended 75% of households in England and Wales be fitted with water meters by 2025

This product usually ships within 24 hours. Standard UK delivery cost is £3.95.


Not what you're after?
View all the eco products in our water saving devices section, or click on any of the links on the left hand side to see more.

 
Price: £16.99 incl. VAT
   
Quantity:     

 
For help and advice, or to order over the phone,
please call 0800 288 8970.